Working Mode; Towing A Trailer; Setting The Working Speed; Switching Adr On And Off - Mercedes-Benz Sprinter Operating Instructions Manual

Hide thumbs Also See for Sprinter:
Table of Contents

Advertisement

Working mode

ADR (working speed governor)
General notes
When activated, ADR automatically increases
the engine speed to a preset speed or a speed
you have set.
After a cold start, the idling speed of the
i
engine is increased automatically. If the
preset working speed is lower than the
increased idling speed, the working speed
is only reached once the engine has com-
pleted the warm-up phase.
It is only possible to activate ADR with the
vehicle stationary and the parking brake
applied.
The selector lever of the automatic trans-
mission must be in position P.

Switching ADR on and off

To activate: press upper section : of the
X
E switch while the engine is running.
The indicator lamp in the switch comes on.
The K indicator lamp in the instrument
cluster lights up or the display shows the
Operating speed
following message:
governor
active.
To deactivate: press lower section ; of
X
the E switch while the engine is run-
ning.
The indicator lamp in the switch goes out.

Towing a trailer

ADR is automatically deactivated if:
you release the parking brake.
R
the brake pedal is depressed.
R
the vehicle moves.
R
the control unit detects a malfunction.
R

Setting the working speed

Activate ADR.
X
To increase: press the E button.
X
To decrease: press the F button.
X
Towing a trailer
Notes on trailer towing
Important safety notes
G
WARNING
Installing an unsuitable ball coupling may
result in overloading of the trailer tow hitch
and the rear axle. This applies especially if the
ball coupling in question is longer or angled
differently. This could seriously impair the
driving characteristics and the trailer can
come loose. There is a risk of an accident.
You should only ever install a ball coupling
that has the permissible dimensions and that
is designed to meet your trailer-towing
requirements. Do not modify the ball coupling
or the trailer tow hitch.
G
WARNING
If you use a ball coupling that is not approved
for your vehicle, it may cause excessive strain
175
Z

Advertisement

Table of Contents
loading

Table of Contents