Swiveling Front Seats; Twin Front-Passenger Seat - Mercedes-Benz Sprinter Operating Instructions Manual

Hide thumbs Also See for Sprinter:
Table of Contents

Advertisement

Seats
84
If the seat moves up and down frequently and
to a great extent, you can lock the seat in the
lower range.
To engage the seat suspension lock:
X
turn lever C upwards.
When it next moves, the seat will lock in
position.
To release the seat suspension lock:
X
turn lever C to the right.
The seat can now move up and down again.

Swiveling front seats

G
WARNING
If the driver's and front-passenger seats are
not engaged facing the direction of travel
while driving, the restraint systems may not
be able to provide the intended protection.
There is an increased risk of injury, possibly
even fatal.
Engage the driver's and front-passenger seats
so they are facing the direction of travel
before starting the engine.
! When rotating the seats, make sure that
there is sufficient space to do so.
Move the seat forward or back first. This
will help to avoid contact with other parts of
the interior.
Push the handbrake lever down to the stop.
The parking brake or handbrake lever could
otherwise be damaged.
Seat release (example: front-passenger seat)
The driver's seat and front-passenger seat
can be rotated by 50° and 180°.
The seats engage when facing in the direction
of travel as well as when facing in the opposite
direction and also engage at an angle of 50°
to the door.
Make sure that the parking brake has been
X
engaged and that the handbrake lever has
been pushed down to the stop
(
page 150).
Y
Adjust the steering wheel to provide the
X
necessary space to rotate and adjust the
driver's seat (
page 88).
Y
Before rotating, push the front-passenger
X
seat forwards (
page 83).
Y
To rotate the seat: push lever : on the
X
rear of the seat towards the center of the
vehicle and rotate the seat slightly inwards.
The rotation device is released.
Release lever :.
X
Turn the seat about 50° towards the out-
X
side or inside to the desired position.

Twin front-passenger seat

To fold a seat cushion forwards: lift the
X
seat cushion out of front anchorage :.
Pull the seat cushion forwards slightly and
X
out of rear anchorage ;.
Fold the rear edge of the seat cushion up.
X
You can stow various articles in the space
i
under the twin front-passenger seat.

Advertisement

Table of Contents
loading

Table of Contents