Telephone Menu; Resetting The Trip Computer; Accepting A Call/Rejecting Or Ending A Call; Dialing A Number From The Phone Book - Mercedes-Benz Sprinter Operating Instructions Manual

On-board computer (vehicles with steering wheel buttons)
200

Resetting the trip computer

Using the steering wheel buttons
Press the V or U button to select
X
After start.
Press the 9 or : button to select the
X
function you would like to reset.
Press and hold the 9 reset button until the
X
values are reset to "0".

Telephone menu

Introduction
G
WARNING
If you operate information systems and com-
munication equipment integrated in the vehi-
cle while driving, you will be distracted from
traffic conditions. You could also lose control
of the vehicle. There is a risk of an accident.
Only operate the equipment when the traffic
situation permits. If you are not sure that this
is possible, park the vehicle paying attention
to traffic conditions and operate the equip-
ment when the vehicle is stationary.
You must observe the legal requirements of
the country in which you are currently driving
when operating a mobile phone in the vehicle.
If it is permitted to operate a mobile phone
while the vehicle is in motion, only operate it
when road and traffic conditions permit.
If you have connected a mobile phone to the
Sprinter hands-free system, you can operate
it using the functions in the
Switch on the mobile phone (see the sep-
X
arate operating instructions).
Switch on the audio equipment (see the
X
separate operating instructions).
X
Establish a Bluetooth
between the mobile phone and the audio
equipment (see the separate operating
instructions).
X
X
i
i
Accepting a call
X
Rejecting or ending a call
X

Dialing a number from the phone book

TEL
You can enter new telephone numbers into
menu.
the phone book via the mobile phone (see the
separate operating instructions). If your
mobile phone is able to receive calls, you can
search for and dial a number from the phone
book.
®
connection
Press the V or U button on the steer-
TEL
ing wheel to select the
Please enter PIN:
When
display, enter the PIN using the mobile
phone or audio equipment.
The mobile phone will search for a network.
The display remains blank during this time.
You will see the mobile phone operational
readiness display once the mobile phone
has found a network.
You can obtain further information about
suitable mobile phones and connecting
mobile phones via Bluetooth
fied specialist workshop.
If the mobile phone operational readiness
symbol goes out, your vehicle is outside of
the transmission and reception range.
Press the 6 button on the steering
wheel to accept an incoming call.
The display shows the call duration.
Press ~ button on the steering wheel to
reject or end a call.
The caller then hears the engaged tone.
The display shows the mobile phone opera-
tional readiness symbol again.
menu.
appears in the
® at any quali-