Cleaning The Sliding Door; Cleaning The Electrical Step; Cleaning The Trailer Tow Hitch - Mercedes-Benz Sprinter Operating Instructions Manual

Clean camera lens : with clean water and
X
a soft cloth.
Make sure that you do not apply any wax to
camera lens : when waxing the vehicle. If
necessary, remove the wax using water,
shampoo and a soft cloth.

Cleaning the sliding door

Remove foreign objects from the vicinity of
X
the contact surfaces and contact pins of
the sliding door.
Clean the contact surfaces and contact
X
pins with a mild cleaning agent and a soft
cloth.
Do not oil or grease the contact plates and
contact pins.
Steps

Cleaning the electrical step

Clean the electrical step at least once a
month. Make sure that no dirt accumulates in
the housing or on the step.
Extend the electrical step (
X
Close the sliding door until the door lock
X
engages.
The electrical step remains extended for
cleaning.
Clean the electrical step and the housing
X
with a power washer.
After cleaning, spray the step guides on
X
each side with silicone spray when the
housing and electrical step are dry.
Do not use oil or grease as a lubricant.
Retract the electrical step.
X
Access step in the bumper
Example: access step in the bumper
Pay attention to the important safety notes in
the "Notes on care" (
washers" (
Keep step in the bumper : free from dirt,
such as:
mud
R
clay
R
snow
R
ice
R
Clean access step in the bumper : with a
X
power washer.
page 74).
Y

Cleaning the trailer tow hitch

! Do not clean the ball coupling with a
power washer. Do not use solvents.
! Observe the notes on care in the Opera-
tor's Manual for the trailer tow hitch and
the ball coupling manufacturer.
You can also have the maintenance work on
the ball coupling and the trailer tow hitch car-
ried out by a qualified specialist workshop.
page 268) and "Power
Y
page 270) sections.
Y
Care
273
Z