Message Memory - Mercedes-Benz Sprinter Operating Instructions Manual

Display messages
202
able to protect you or others as they are
designed to do.
Always have service work carried out at a
qualified specialist workshop.
If you turn the key to position 2 in the
i
ignition, a display check is performed. All
warning and indicator lamps (except the
turn signal indicator lamps) and the display
are activated. Before starting the journey,
check that the warning and indicator lamps
are operating correctly.
Vehicles without steering wheel but-
tons
Warnings, malfunctions or additional infor-
mation may also be shown in the display. The
following tables show all the display mes-
sages. A warning tone sounds with certain
display messages.
Vehicles with steering wheel buttons
The on-board computer shows warnings, mal-
functions or additional information in the dis-
play. A warning tone sounds with certain dis-
play messages. Display messages of a high
priority are shown in red.
Please respond in accordance with the dis-
play messages and follow the additional
notes in this Operator's Manual.
You can hide low-priority display messages by
pressing the V, U, 9 or : but-
ton on the steering wheel or the 9 reset but-
ton.
You cannot hide display messages of the
highest priority. These messages will con-
tinue to be shown in the display until their
cause has been eliminated.
The on-board computer stores certain display
messages in the message memory
( page 202).
Y

Message memory

The on-board computer only records and
shows malfunctions and warnings from cer-
tain systems. Therefore, make sure that your
vehicle is safe to use. You could otherwise
cause an accident by driving an unsafe vehi-
cle.
The on-board computer stores certain display
messages. In the Message memory menu,
you can call up stored display messages.
Using the steering wheel buttons
Press the V or U button repeatedly
X
until the number of stored display mes-
2 messages, appears in the dis-
sages, e.g.
play.
If no malfunctions have occurred, the
messages
message appears.
Scroll through the stored display messages
X
with the 9 or : button.
To exit the message memory menu:
X
press the V or U button.
When you switch off the ignition, all display
messages are deleted from the message
memory. You can only remove the key when it
is in the basic position.
No