Installing The Cpu; Installation Location Of Cpus - Fujitsu Primergy RX300 S4 User Manual

6.3 Installing the CPU

Up to two CPUs can be installed on this server by installing an optional CPU.

6.3.1 Installation Location of CPUs

The server comes equipped with one CPU in CPU socket 1. When adding an optional CPU, install it in
CPU socket 2.
[Front]
• Before installing/removing the CPU, turn off the server and all peripheral
devices. Also unplug all power cables from the server ( "1.4.3 Turning Off the
Server" (p.32)). Failure to do so may cause electric shock or device failure.
• Do not install any unauthorized third party optional CPU. Doing so may cause
a device failure.
• Do not use a CPU with a different frequency/cache size. In that case the
system will not start.
• The circuit boards and soldered parts of internal options are exposed and can
be damaged by static electricity. Before handling them, first touch a metal part
of the server to discharge static electricity.
• Do not touch the circuitry on boards or soldered parts. Hold the metallic areas
or the edges of the circuit boards.
(installed as a
standard feature)
PRIMERGY RX300 S4 User's Guide
139