How To Install Memory Board 2 - Fujitsu Primergy RX300 S4 User Manual

Chapter 6 Installing Internal Options
10
Save the BIOS configuration data.
"4.3 Storing the System Configuration Information" (p.84)

6.4.5 How to Install Memory Board 2

This section explains how to add a memory module in optional memory board 2.
1
Turn off the power and all peripheral devices, and pull the server out from the
rack to remove the top cover.
"6.2.1 How to Remove the Top Cover" (p.136)
2
Touch a metal part of the server to discharge static electricity.
3
Remove the fan duct.
"6.2.2 How to Remove the Fan Duct" (p.138)
4
Install/Remove memory modules from memory board 2.
Refer to Step 4 in "6.4.4 How to Install or Remove Memory Modules" ( p.150)
5
Install memory board 2 in memory board slot 2.
6
Attach the fan duct.
" How to attach the fan duct" (p.138)
7
Attach the top cover and push the server back into the rack.
" How to attach the top cover" (p.137)
8
Initialize the Extended System Configuration Data (ESCD).
Set [Reset Configuration Data] to [Yes] in the [Advanced] menu of the BIOS Setup Utility.
"7.2.5 Advanced Menu" (p.190)
152