Turning On The Server - Fujitsu Primergy RX300 S4 User Manual

2
Turn the handle in the direction of the arrow and pull it forward.
Unless you are inserting/removing media or turning the power on/off, keep the rack door closed. Doing
so blocks electric waves from cell phones, etc.
Do not lose the keys. If the key is lost, contact an office listed in the "Contact Information" of the "Start
Guide".

1.4.2 Turning On the Server

1
Open the rack door.
"1.4.1 Opening the Rack Door" (p.29)
2
Make sure that the CD/DVD drive is empty.
3
Turn on the display and peripheral devices.
Turn and then pull
• Do not move, strike, or shake the server when it is turned on. This can damage
the hard disk in the server and cause data loss.
• Turn the server on when the temperature is in its operating environment range
(10–35°C). For details on the operating environment, refer to "Start Guide" and
"Safety Precautions".
When operating the device outside of this operating environment, the server
may operate improperly, damage data etc.
Furthermore, Fujitsu cannot be held responsible for any related damage,
malfunction, or loss of data, etc.
• Be sure to wait for 10 seconds or more after shutdown before turning the
server on.
PRIMERGY RX300 S4 User's Guide
31