Chapter 6 Installing Internal Options
6.2 Attaching/Removing Each Cover
When installing internal options, remove the top cover and fan duct. See below how
to remove each cover.
6.2.1 How to Remove the Top Cover
1
Open the rack door.
"1.4.1 Opening the Rack Door" (p.29)
2
Turn off the server and all peripheral devices. Also unplug all cables from the
server.
"1.4.3 Turning Off the Server" (p.32)
3
Loosen the screws that hold the server to the rack.
136
• Before attaching/removing the top cover and fan duct, turn off the server and
all peripheral devices. Also unplug all power cables from the server ( "1.4.3
Turning Off the Server" (p.32)). Failure to do so may cause electric shock.
• Use stabilizers to prevent the rack from tipping when installing the rack.
Pulling the server out of the rack without installing stabilizers may cause the
rack to tip over.