Fujitsu Primergy RX300 S4 User Manual page 189

Item
Boot Menu
MultiBoot for HDs
Boot Sequence
table: Items on the Boot Options Submenu
Setting
Enabled (Unchangeable)
Enabled (Unchangeable)
Displays the Boot
Sequence by pressing the
[Enter] key.
• CD-ROM Drive
• Diskette
• Hard Drive
• Legacy LAN Card
PRIMERGY RX300 S4 User's Guide
Description
Sets whether or not to enable the Boot menu.
Sets whether or not to enable selection of which
hard disk unit to load the OS from, when multiple
hard disk units are installed.
Specifies the drives from which the OS is loaded
and the precedence order of the drives. Use the [+]
[-] keys to change the priority order for the selected
device. Booting from the selected device can be
disabled by pressing the [Space] key. (When it is
disabled, [!] appears in front of the device name.) If
a non-existent device appears in the list, it can be
deleted by pressing the [*] key.
189