Fujitsu Primergy RX300 S4 User Manual page 100

Chapter 4 Operations after OS Installation
4
Right-click the volume to be reduced, and click [Shrink Volume].
The [Shrink <Selected volume>:] window appears.
5
Specify the desired size in [Enter the amount of space to shrink in MB].
6
Click [Shrink].
Shrinking is executed, the [Disk Management] window appears.
7
Click [Exit] in the [File] menu.
Server Manager finishes.
100
Size of available shrink space can be restricted if snapshots or pagefiles are enabled on the
volume.
The partition size after changing is displayed in [Total size after shrink in MB].
Specify the value so that the total size after reduction becomes the desired partition size.
The maximum value that can be specified in [Enter the amount of space to shrink in MB] is dis-
played in [Size of available shrink space in MB].
Click [Shrink] to start the shrinking process. Make sure to check whether the proper value is
specified in [Total size after shrink in MB] before clicking [Shrink].