Fujitsu Primergy RX300 S4 User Manual page 35

2
Pull the CD/DVD tray out.
3
Place the CD/DVD at the center of the tray.
While supporting the CD/DVD tray, push the tray until it clicks into position.
Label side up
If the CD/DVD is placed improperly when the tray is pushed into the unit, the CD/DVD or the
drive may be damaged.
Be careful not to touch the lens of the CD/DVD drive.
When inserting a CD/DVD, the CD/DVD access LED lights up or blinks. After checking that the
LED is turned off, proceed with the next procedure.
CD/DVD tray
CD/DVD tray
PRIMERGY RX300 S4 User's Guide
35