Audio Settings Page - AMX Modero ViewPoint MVP-5200i Operation/Reference Manual

Setup Pages

Audio Settings Page

The Audio Settings page allows adjustment of volume levels and panel sounds settings (FIG. 51).
FIG. 51 Audio Settings pages
Features on these pages include:
Audio Settings Page
Back:
WiFi/Wired/USB Icon:
Connection Status icon:
Default Panel Sounds:
Internal Sound Level:
Audio Output:
Intercom Mic Level:
48
Saves all changes and returns to the previous page.
The icon to the left of the Connection Status Icon displays whether the current
connection to the Master is Wireless (image of a radio antenna), Wired (image
of three networked computers), or USB (USB connection symbol).
The icon in the upper-right corner of each Setup page provides a constant
visual indication of current connection status.
Note: a Lock appears on the icon if the panel is connected to a secured NetLinx
Master.
• Activating the Button Hit button plays a default sound when you touch an
active button.
• The Play Test Sound button plays a test WAV/MP3 file over the panel's
internal speakers.
• Activating the Button Miss button plays a default sound when you touch a
non-active button or any area outside of the active button
• The singleBeep01 and singleBeep02 buttons play preselected examples of
single beeps over the panel's internal speakers
Adjusts the volume level on the panel's internal speaker:
• Use the Up/Down buttons to adjust the volume (range = 0 - 100)
• The Internal Sound Level bargraph indicates the current sound level. Press
the bargraph to the left or right of the graph marker to adjust the volume level
in one-percent increments (range = 0 - 100), or press the bargraph and hold
to move the graph marker to the desired level.
• The Mute button mutes the internal speaker volume
Enables USB headphone output.
Adjusts the volume level on the intercom's microphone:
• Use the Up/Down buttons to adjust the microphone level (range = 0 - 100).
Press the bargraph to the left or right of the graph marker to adjust the
volume level in one-percent increments (range 0 - 100), or press the
bargraph and hold to move the graph marker to the desired level.
MVP-5200i Modero® ViewPoint® Touch Panel with Intercom, 5.2 and 5"