Figure 5-7. Remote Monitor Panel Ii And Remote Monitor Panel Ii Terminal Locations; Figure 5-8. Remote Monitor Panel Ii, Relay Interface Module Ii, Or Supervisory Contact Module Ii Wiring - Eaton Power Xpert 9395 Plus Installation And Operation Manual

INSTALLING OPTIONS AND ACCESSORIES
UPS Can Card J3
Twisted Pair
Figure 5‐8. Remote Monitor Panel II, Relay Interface Module II, or Supervisory Contact Module II Wiring
t
5-10
Power Xpert 9395 Plus 1 UPS (225–275 kVA) Installation and Operation Manual
Terminal TB1
Signal Connections
from the UPS
Figure 5‐7. Remote Monitor Panel II and Remote Monitor Panel II Terminal Locations
RMP II, RIM II, or SCM II
Table 5‐5. RMP II, RIM II, or SCM II Wiring Terminations
From
UPS CAN Card
J3–6 (TX)
J3–7 (TX)
N/A
N/A
N/A
To Tightening Torque
RMP II, RIM II, or SCM II
TB1–5 (RDX*)
TB1–4 (RDX)
TB3 Line
TB3 Neutral
Ground Terminal 2.7 (24) Maximum
S
164201710 Rev 7
Ground
Terminal
Terminal TB3
120 Vac Power
Ground Terminal
Neutral
120 Vac from
Critical Bus
Line
Remarks
Nm (lb in)
0.9 (8)
Use twisted pair
0.9 (8)
0.9 (8)
0.9 (8)
www.eaton.com/powerquality