Hummer H3T Owner's Manual page 353

04AKENG59_H3T.fm Page 353 Thursday, July 31, 2008 12:07 PM
CAUTION
Never use oil or grease on studs
or nuts. If you do, the nuts
might come loose. Your wheel
could fall off, causing a serious
accident.
9. Place the spare tire on the
wheel mounting surface.
10. Install the wheel nuts with the
rounded end toward the
wheel and tighten until the
wheel is held against the hub.
For wheels with a wheel lock
key, use the wheel lock key
between the lock nut and
wrench.
11. Turn the wheel wrench
counter-clockwise to lower the
vehicle.
12. Lower the jack completely.
1
3
6
4
5
2
13. Tighten the nuts firmly with a
wrench in the pattern shown
above.
Section 5
CAUTION
Incorrect wheel nuts or
improperly tightened wheel
nuts can cause the wheel to
become loose and even come
off. This could lead to an
accident. Be sure to use the
correct wheel nuts. If you have
to replace them, be sure to get
the right kind. Stop somewhere
as soon as you can and have the
nuts tightened with a torque
wrench to the proper torque.
See "Specifications and
Capacities" in Section 4 for the
proper wheel nut torque.
353 . . .
–
–
–
–
–