Hummer H3T Owner's Manual page 307

04AKENG59_H3T.fm Page 307 Thursday, July 31, 2008 12:07 PM
Follow the diagram above for the
correct rotation pattern.
Don't include the spare tire in your
tire rotation.
Make sure the wheel nuts are
properly tightened.
If you rotate your tires or replace
any of your tires or tire pressure
sensors, the tire pressure monitor
will need to be reset.
See "Tire Pressure Monitor"
earlier in this section for more
information.
After rotation, adjust the front and
rear tire pressures according to the
tire information label.
CAUTION
Rust or dirt on the wheel, or on
the parts to which it is fastened,
can make the wheel nuts
become loose after a time. The
wheel could come off and cause
an accident. When you change
a wheel, remove any rust or dirt
from the places where the
wheel attaches to the vehicle. In
an emergency, you could use a
cloth or a paper towel to do
this; but be sure to use a scraper
or wire brush later, if necessary,
to get all the rust or dirt off.
Section 4
CAUTION
Incorrect wheel nuts or
improperly tightened wheel
nuts can cause the wheel to
become loose and even come
off. This could lead to an
accident. Be sure to use the
correct wheel nuts.
307 . . .
–
–
–
–