Changing The Flat Tire - Hummer H3T Owner's Manual

04AKENG59_H3T.fm Page 350 Thursday, July 31, 2008 12:07 PM
Problems on the Road

Changing the Flat Tire

Before proceeding, perform a safe-
ty check. See the Cautions under
"Changing a Flat Tire", earlier.
1. To remove the center cap,
place the flat end of the wheel
wrench in the slot on the
wheel and gently pry it off.
. . . 350
2. Loosen the wheel nuts with
the wheel wrench. Do not
remove them yet.
Turn the wheel wrench coun-
terclockwise to loosen the
wheel nuts.
If your vehicle has locking
wheel nuts, the key is in the
tool bag.
For wheels with a wheel lock
key, use the wheel lock key
between the lock nut and
wrench.
3. Assemble the wheel wrench,
jack handle extensions and
the jack handle.
Attach the jack handle to the
jack.