Connectivity & Network Setup; Port Settings - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

5 Tools
Connectivity & Network Setup
In [Connectivity & Network Setup], you can configure settings related to the
Connectivity & Network feature.
For information on Connectivity and Network Settings, refer to "Printer Environment Settings" (P.277)
or "E-mail Environment Settings" (P.299).
If you use CentreWare Internet Services, more detailed settings are possible. For more information, refer
to "CentreWare Internet Services Settings" (P.269).
The following shows the reference section for each setting.

Port Settings ..............................................................................................................................164

Protocol Settings .......................................................................................................................169
Machine's E-mail Address/Host Name .....................................................................................172
Proxy Server Settings (ApeosPort Series Models Only) ..........................................................173
EP Proxy Server Setup..............................................................................................................174
SIP Settings ...............................................................................................................................175
T.38 Settings .............................................................................................................................177
Outgoing/Incoming E-mail Settings .........................................................................................178
Remote Authentication/Directory Service................................................................................179
Security Settings .......................................................................................................................184
5
Other Settings............................................................................................................................187
1
On the [Tools] screen, select [Connectivity & Network Setup].
For the method of displaying the [Tools] screen, refer to "System Settings Procedure" (P.108).
2
Select an item to set or change.
Port Settings
Set the interface of the machine connected to a client. In [Port Settings], you can
configure the following settings.
Important • For LPD, Port9100, HTTP-SSL/TLS, and SIP do not use a number that is the same as a port
For information on HTTP-SSL/TLS port, refer to "HTTP - SSL/TLS Port Number" (P.184).
Parallel
Port Status
Select [Enabled] to use a parallel interface.
Print Mode
Select the printer language use on the machine. Selecting [Auto] enables the machine to
automatically determine and use the most suitable language to print data received from the
host device.
164
number of another port.
For a port that uses HTTP (IPP, Internet Services (HTTP), UPnP Discovery, SOAP,
WebDAV, and Web Services on Devices (WSD)), do not use a number that is the same as a
port number of LPD, Port9100, and HTTP-SSL/TLS.
Furthermore, if any of the above are set to one of the port numbers indicated below,
operation may no longer be performed properly depending on the setting conditions of the
port:
25, 139, 427, 445, 631, 15000