Specifications - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

16 Appendix

Specifications

This section lists the main specifications of the machine. Note that the specifications
and the appearance of the product may change without prior notice.
Copy Function
Type
Memory
HDD
Scanning Resolution
Printing Resolution
Halftone
Warm-up Time
Original Paper Size
Output Paper Size
Output Paper Weight
First Copy Output Time
Reduction/Enlargement
16
556
Console
1 GB (Maximum 2 GB)
160 GB (Usable space: 40 GB)
Important • Not all the HDD space described above can be used.
Note • HDD is an optional for some models.
600 × 600 dpi
600 × 600 dpi
256 gradation
30 seconds or less (at 20 °C room temperature)
10 seconds or less (After exiting low power mode (at 20 °C room
temperature)
The maximum size is 297 × 432 mm (A3, 11 × 17") for both sheets
and books
[Paper Tray 1 to 4]
: A3 (297.0 × 420.0 mm),
Maximum
11 × 17" (279.4 × 431.8 mm)
: A5 (148.0 × 210.0 mm)
Minimum
[Paper Tray 5]
: A3 (297.0 × 420.0 mm),
Maximum
11 × 17" (279.4 × 431.8 mm)
: Postcard (100 × 148 mm),
Minimum
Envelope (235.0 × 120.5 mm)
Image Loss
Top edge : 4 mm or less
Bottom edge : 4 mm or less
Left and Right edges : 4 mm or less
Paper Tray 1 : 60 - 105 gsm
Paper Tray 2 to 5 : 60 - 216 gsm
Paper Tray 6 (HCF): 56 - 216 gsm
Important • Use paper recommended by Fuji Xerox. Copying may not
be performed correctly depending on the conditions.
<When the document glass is used> (A4 )
3.1 seconds
<When the document feeder is used> (A4 )
4.6 seconds
±
Size-to-Size : 1:1 0.7%
Preset % : 1:0.50, 1:0.70, 1:0.81, 1:0.86, 1:1.15, 1:1.22,
1:1.41, 1:2.00
Variable % : 1:0.25-1:4.00 (1% increments)