Postscript Paper Supply; Postscript Font Absence; Postscript Font Substitution - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

5 Tools
Allow Print Driver to Override
Select the check box to print a banner sheet according to the banner sheet print settings of
the print driver.
Banner Sheet Offset
Set whether or not to offset when banner sheets are output.
Banner Sheet Tray
Select a paper tray used for banner sheets.
This setting applies to Trays 1, 2 and 3, 4, 6 (optional). You cannot apply setting to Tray 5.

PostScript Paper Supply

Select whether the PostScript DMS (Deferred Media Selection) feature is enabled or disabled
when the paper tray is selected. Select [Auto Select] to enable the DMS feature, or [Select
Paper Tray] to disable the feature.
When PostScript data generated by other than the print driver is printed, the tray is not
selected as intended depending on the description method of the PostScript data. In this
case, select [Select Paper Tray].
Note
5

PostScript Font Absence

Set an action to take when a PostScript font specified in a job is not present.
Note
Cancel Printing
Cancels printing.
Substitute Font and Print
Prints using a substitute font. Courier is used as the substitute font.

PostScript Font Substitution

Set whether or not to use ATCx as a substitute if a PostScript font specified in a job is not
present.
Note
XPS Print Ticket Processing
Set how the machine processes the print tickets written in XPS documents.
Off
Does not process print tickets.
Standard Mode
Uses the standard mode to process print tickets.
Compatible Mode
Uses the Microsoft-compliant mode to process print tickets.
194
• Even when you select [Auto Select], the setting is automatically changed to [Select Paper
Tray] when [Use Larger Size] or [Use Closest Size] is selected for [Substitute Tray] and print
PostScript data.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.