Secure Watermark - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

Force Watermark - Print Stored File
Set whether or not to forcibly use the Watermark feature when printing from a folder.
The user ID, machine ID, and date and time are printed.
Note • You can authorize a user to temporarily cancel force watermark printing. For more
Force Watermark - Media Print
Set whether or not to use the Watermark feature when printing for Media Print - Text.
The user ID, machine ID, and data and time are printed.
Note • You can authorize a user to temporarily cancel force watermark printing. For more
Custom Watermark 1 to 3
Register text to be printed as the Watermark. You can enter up to 32 single-byte characters.
The registered text is displayed at [Default Watermark].
For information about how to enter characters, refer to "Entering Text" (P.35).
Print this Sample List
Prints hidden text samples of various densities. Select [Watermark/Background Contrast],
referring to the print samples.

Secure Watermark

You can set whether or not to detect embedded digital codes in the document. When you select
this feature enabled, the machine forcibly cancels printing when it scans the document with the
protection code embedded.
Important • When [On] is selected, a document without a restriction code may be selected as a
• Copy protection using the Secure Watermark feature is not guaranteed to always operate
• Please note that Fuji Xerox is not liable for any damages caused by the use or without the
Note • An optional component is required to use this feature. For more information, contact our
• This feature is only available for a Fuji Xerox manufactured machine installed with the
Secure Watermark Control
Set whether or not to detect a protection code embedded in a document.
Secure Watermark Detection
When you set [On] and copy or scan a document with a protection code embedded, the copy or
scan job is canceled.
Digital Codes Settings
Set the passcode of the digital code and the text to embed in a document. Analyzing the
digital code enables you to verify "when", "by whom", and "from which machine" the
document was output. This prevents leakage of confidential information.
information, refer to "User Roles and Authorization Groups" (P.371).
information, refer to "User Roles and Authorization Groups" (P.371).
document with a restriction code. If you have this problems a lot, you can change the setting
of the authentication group in which the user belong to a mode that stops scanning and
allows you to select whether to continue scanning when a restriction code is detected. A
system administrator always use the machine in this mode. For more information about the
setting of authorization group, refer to "Authentication" (P.370).
properly. The feature may not operate properly depending on a document or conditions. For
more information, contact our Customer Support Center.
use of the Secure Watermark feature.
Customer Support Center.
Secure Watermark feature.
Common Service Settings
139
5