Other Settings - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

5 Tools
E-mail Addresses 1 to 5
Specify the e-mail addresses to notify the result of the jobs.
Note
E-mail Message
Enter a comment attached to the e-mail.

Other Settings

You can configure other settings related to the machine.
Fax Service
Switches between the Fax feature and the Server Fax feature.
Note
Scan to Fax
Allows you to use the Fax feature on the machine.
5
Scan to Fax Server
Allows you to use the Server Fax feature on the machine.
Note
Offset Stacking (Center Tray)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly to
separate it from the previous job. When a set of copies is delivered to the front of the tray, the
next set is delivered to the rear of the tray. Set the offset function for the Center Tray.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or [Offset
per Job] is selected, the machine slightly shifts the output position per set or per job (print job)
respectively.
Offset Stacking (Center Tray - Upper)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly to
separate it from the previous job. When a set of copies is delivered to the front of the tray, the
next set is delivered to the rear of the tray. Set the offset function for the Center Tray - Upper.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or [Offset
per Job] is selected, the machine slightly shifts the output position per set or per job (print job)
respectively.
Offset Stacking (Center Tray - Lower)
Offsetting means that each set of copies is delivered to the center tray and shifted slightly to
separate it from the previous job. When a set of copies is delivered to the front of the tray, the
next set is delivered to the rear of the tray. Set the offset function for the Center Tray - Lower.
Select from [No Offset], [Offset per Set], and [Offset per Job]. When [Offset per Set] or [Offset
per Job] is selected, the machine slightly shifts the output position per set or per job (print job)
respectively.
146
• When you select [Save] to exit this screen without specifying an e-mail address, the setting
of [Targeted Jobs] or [E-mail Message] is deleted.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.
• The Fax and Server Fax features cannot be enabled at the same time.
• This feature does not appear for some models. An optional component is required. For more
information, contact our Customer Support Center.