Automatically Printed Reports/Lists; Transmission Report - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

Auditron Report (Print Jobs)
You can check the total number of printed pages and sheets of paper used for each
client (job owner). [Auditron Report (Print Jobs)] counts pages from the time at which
the data is initialized.
Important • When [Print Service] is set to [Disable Accounting] in [Auditron Mode] under [Accounting
Note • [No.] displayed on the report is the User Administration Number assigned when a user is
Auditron Report (Scan Jobs)
You can check the total number of pages scanned with the machine. If the limit is set
for the number of pages that can be scanned, you can also check the limit value.
[Auditron Report (Scan Jobs)] counts pages from the time at which the data is
initialized.
Note • [No.] displayed on the report is the User Administration Number assigned when a user is
Auditron Report (Fax Jobs)
You can check the total number of fax transmissions/receptions and the total number
of pages transmitted for each user.
Note • [No.] displayed on the report is the User Administration Number assigned when a user is

Automatically Printed Reports/Lists

Some reports/lists related to the Fax and Scan services can be printed only
automatically. The following describes reports/lists that can be printed automatically.
Transmission Report - Job Undelivered
The report is automatically printed when a transmission of scanned data to a computer
on a network or a transmission of scanned data by e-mail fails. When a fax, the IP Fax
(SIP), or the Internet Fax transmission fails, this report is also printed. You can check
a thumbnail of the scanned data and its transmission result.
You can set not to print out the Transmission Report - Undelivered automatically.
For information on setting whether to print the report for e-mails automatically, refer to "Scan File
Transfer Report" (P.135).
For information on setting whether to print the report for faxes automatically, refer to "Transmission
Report - Job Undelivered" (P.135).

Transmission Report

The report is automatically printed when a transmission of scanned data to a computer
on a network or a transmission of scanned data by e-mail succeeds. When a fax, the
IP Fax (SIP), or the Internet Fax transmission succeeds, this report is also printed. You
can check a thumbnail of the scanned data and its transmission result.
You can set not to print out the Transmission Report - Undelivered automatically.
For information on setting whether to print the report for e-mails automatically, refer to "Scan File
Transfer Report" (P.135).
For information on setting whether to print the report for faxes automatically, refer to "Transmission
Report - Job Undelivered" (P.135).
Type], [Meter Report (Print Jobs)] is displayed instead of [Auditron Report (Print Jobs)]. For
more information on Meter Report (Print Jobs), refer to "Meter Report (Print Jobs)" (P.94).
registered under [Accounting] or [Authentication/Security Settings].
registered under [Accounting] or [Authentication/Security Settings].
registered under [Accounting] or [Authentication/Security Settings].
Machine Information
4
95