Notes And Restrictions On The Use Of The Copy Feature - Fuji Xerox ApeosPort-IV 5070 Administrator's Manual

16 Appendix

Notes and Restrictions on the Use of the Copy Feature

Copy Feature
The machine does not offer the Improves Fit feature.
Copy and Simple Copy
You cannot switch the screen between the Copy and Simple Copy services. Return to
the [Services Home] screen, and then select a service. In that case, the settings
specified in either service are cleared.
ID Card Copy
Notes and Restrictions on the Use of the Print Feature
Output of Long Feed Documents
The output of long feed documents is not supported.
PostScript Driver
Some options such as Poster (Photo Enlargement) are not supported by the PostScript
driver. With the Pages Per Sheet (N-Up) feature, you can specify 2, 4, 6, 9, or 16 pages
up, and with or without frame borders.
Printing from Macintosh via USB Connection
When you send a print job from the PostScript driver of Macintosh connected via USB
and the job includes application data with graphic data (EPS file including binary data)
pasted, the machine may misidentify the binary data as protocol data; therefore, the
output of text data may extend for multiple pages.
In this case, select [RAW] for [Adobe Communication Protocol] under [Tools] >
[Connectivity & Network Setup] > [Port Settings] > [Parallel] or [USB] to properly print
data which includes EPS files with binary data.
16
ContentsBridge
With ContentsBridge, you can print PDF, TIFF, JPEG, and XPS data by drag and drop.
To print DocuWorks documents, however, DocuWorks Viewer Light (free distribution)
or DocuWorks 6.0 or later (sold separately) is required. PDF and TIFF print data will be
transferred to the machine directly, whereas DocuWorks document data will be first
processed by the client computer, and then transferred to the machine and printed.
626
When [Tools] > [Connectivity & Network Setup] > [Port Settings] > [Port Status] >
[EtherTalk - Port Status] is set to [Enabled], or [USB] > [USB - Print Mode] is set to
any option other than [Auto], exiting the Energy Saver mode activates the entire
machine.
The output device is activated when Secure Print is executed using job tickets of
ContentsBridge Utility.
The machine does not shift the ID card image to the center of the output in any
magnification ratio and image size you specified.
When the reduced size is specified to copy an ID card, the machine may copy the ID
card in a different orientation from the original orientation depending on the
magnification ratio specified.