Table of Contents
Advertisement
UPPER LOUVER, HOOD & LOWER GRILL INSTALLATION & REMOVAL
INSTALLATION
A. Align hooks in upper louver to slots located in the fireplace
face. Set down into position.
Thread screws into nuts on each
end of grill and secure to lower
grill opening.
C.
Partially thread (2) screws (included in components packet)
into nuts at each end of lower grill. Secure to fireplace by
threading screws into corresponding holes in the inside flange
of lower grill opening. The lower grill can now be opened and
closed to access the gas valve and controls.
GRILL SET
B.
Insert upper hood flange into clips located at the top of upper
air passage.
NOTE: THIS IS A FAIRLY TIGHT FIT.
REMOVAL
A. Use both hands to pull hood out of upper air passage clips.
B.
Lift upper louver up and out of slots.
C.
Remove screws securing lower grill at each end to remove
from fireplace.
PAGE 36
Slide flange on upper
hood into clips in the
top of the upper air
passage opening.
Upper hood clips
Advertisement
Table of Contents
Troubleshooting
