Software Upgrade - Fuji Xerox DocuPrint C5005 d User Manual

Transfer
ImageLog

[Software Upgrade]

Note
• This item appears only when EP system is used. Contact our Customers Support Center or your dealer
for details.
• This item is not supported on the model available in China.
Software Upgrade
188
5 Control Panel Settings
Setting
- Sets transfer of image logs to the log server.
Log Set whether or not to enable the image log transfer feature.
Transfer • [Disabled] (default)
• [Enabled]
Logs To Sets automatic transfer of image logs.
Transfer • [Pause]
• [Per Job Basis]
• [Accumulate First] (default)
Note
• [Per Job Basis] is displayed when [Image Log Control] > [Assurance
Transfer Sets the timing that image logs are transferred. Set [Disabled] or
Timing [Enabled] for each of the transfer timings. Default is all [Enabled].
• [At end of the job]
• [At power On]
• [End of selections]
• [When max reached]
Assurance Sets the assurance level when data is transferred to the log server.
Level • [Low] (default)
• [High]
Note
• When [High] is set, data is transferred unconditionally. However,
System Settings
Software Upgrade
Setting
Allows to upgrade the firmware used in the printer to the latest version when
EP system using the Internet has been used.
Note
• EP system may not be available in some regions. Contact our Customers
Support Center or your dealer for its application.
Level] is set to [High].
during data transfer, printer performance might drop or printing may
be paused.
Description
Description