Printing Various Types Of Papers - Fuji Xerox DocuPrint C5005 d User Manual

3.4

Printing various types of papers

The trays 1 - 4, and 6 accept plain paper and various types of papers such as heavyweight
paper or labels.
Change the [Paper Type] settings on the control panel whenever changing the paper type
loaded on the tray.
Note
• Images will not be processed properly when the paper type on the print driver does not match the actual
type of the paper loaded in the paper tray. The toner may not fuse properly onto the paper, resulting in
smearing and other print quality problems.
Refer to
• For information on how to specify the paper type, refer to " Setting the Paper Sizes of Trays" (P. 129),
and " Changing the Paper Type Settings of Trays" (P. 131).
• For information on how to load the settings into the print driver, refer to "2.6 Importing Printer Information
to a Print Driver" (P. 65).
The following procedures use Windows XP WordPad as an example.
Automatically printing after specifying the Paper Type
When the [Paper Type] settings match the loaded paper type in the tray, the printer will
select the appropriate tray based on the paper type setting you specified, even if you do not
specify a paper tray with the print driver.
This method makes it possible to request a print job without worrying about the type of paper
loaded in each paper tray.
In order to use this feature, use the control panel to configure paper type settings for the
printer trays.
1. On the [File] menu, select [Print].
2. Select the printer from the [Select Printer] list, and then click [Preferences].
3. Click <v> beside the [Paper] to display the options, and then select [Advanced Paper
Selection].
3.4 Printing various types of papers
81