Fuji Xerox DocuPrint C5005 d User Manual page 214

[Language]
Language
*1
When [Auto] is selected, data will be deleted if the language emulation automatically
selected is not present or is unavailable on the printer.
*2
Holding down the < > or < > button cycles through the options. To display a setting's
default value, press < > and < > at the same time.
*3
The following information is printed in each line during dump printing:
Count
Hexadecimal code
ASCII code
*4
Character List
No.
*5
• When [Enabled] is set, and the print mode is set to [HexDump], PJL commands are
• When language emulation not installed on the printer is specified by a PJL
*6
WSD stands for Web Services on Devices.
214
5 Control Panel Settings
Settings
Language
Setting
Sets the display language for the control panel.
• [English] (default)
The display language is English.
• [Trad. Chinese]
Displays screen messages in traditional Chinese.
• [Simp. Chinese]
Displays screen messages in simplified Chinese.
• [Korean]
Displays screen messages in Korean.
Prints the total number of bytes counted from the beginning of
the job data.
Prints print data delimited in 4 bytes in hexadecimal format.
Prints print data using JIS X0201 8-bit coded characters.
Characters that are not defined in JIS X0201 are printed as
"UD".
Type
1 Blank
2 Alphabet
3 Numerals
4 Symbols
also output by [HexDump].
command, data is deleted.
Description
Characters
Space
ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijkl
mnopqrstuvwxyz
0123456789
!"#$%&'()*+,-./:;q=r?@m\n^_`