Replacing The Waste Toner Bottle - Fuji Xerox DocuPrint C5005 d User Manual

Replacing the Waste Toner Bottle

Toner that remains on the drum after printing is complete is gathered into the waste toner
bottle. The following messages appear on the printer's control panel when the waste toner
bottle is near or reaches the end of its life.
Ready
Toner Container soon
Replace Waste Toner Bottle
*1
: The page yield of each consumable varies depending on print requests, documents printed, and
how often the power is switched on/off. For more information, refer to "A.3 Life of Consumables
and Regular Replacement Parts" (P. 402).
Important
• Make sure that the power is on when replacing the waste toner bottle.
• When replacing the waste toner bottle, waste toner can spill and soil the floor. Spread some paper on the
floor before starting the replacement procedure.
Replacement Procedure
Note
• When replacing the waste toner bottle, clean the LED printhead with the supplied cleaning bar to prevent
inconsistencies in density or color in prints.
1. Make sure that the machine is not
operating, and open the front cover.
2. Rotate the release lever of the drum
cartridge cover counterclockwise.
Message
The displayed waste toner bottle needs to be replaced soon.
Replace Waste
The number of remaining printable pages is approximately 2,100
The printer will stop and become unable to print. Replace the waste
toner bottle using the procedure under "Replacement Procedure"
(P. 301).
Action
7.1 Replacing Consumables
*1
.
301