M.2 solid-state drive
For a list of available solid-state drives, see
To remove the M.2 solid-state drive:
1.
Prepare the computer for disassembly (see
2.
Remove the stand (see
3.
Remove the rear port cover (see
4.
Remove the Phillips screw (1) that secures the drive to the computer.
5.
Pull the drive away to remove it from the socket (2).
To install the solid-state drive, reverse the removal procedures.
28
Chapter 4 Removal and Replacement Procedures
Mass storage devices on page
Preparing to disassemble the computer on page
Stand on page
21).
Rear port cover on page
11.
23).
21).