Keyboard Selection Keys - ELNA eXcellence 720 Instruction Manual

q e
w

Keyboard Selection Keys

!9
1. LCD Screen Brightness Control
Lighten or darken the screen with this dial.
2. Stitch Width and Needle Position Key
Press "–" or "+" side of key to change setting.
Press "–" or "+" to move needle position left or right.
Straight stitches (1, 6, 011, 012, 061, 062 and 063) can be sewn from
many needle positions by pressing the "–" or "+" side of the key. Center
needle position is 3.5.
3. Stitch Length Key
Press "–" or "+" side of key to change setting. Depending on the stitch
selected, stitch length can be set between 0.0 and 5.0.
NOTE: Fine fabrics should have a stitch length between 1.5 and 2.5,
medium fabrics between 2.0 and 3.0 and heavier fabrics between 3.0 and
4.0.
4. Bobbin Winding Key
Press this key to wind a bobbin. The machine features a separate motor for
bobbin winding making it possible to sew and wind a bobbin at the same
time.
5. Twin Needle Key
Press this key to reduce the width of an individual stitch. The twin needle
symbol is shown on the LCD screen when it is activated. Press the key
again to cancel twin needle function.
6. Elongation Key
Satin stitches 081 to 089 can be lengthened up to five times their regular
size without the stitch length varying. Press this key to change the
elongation. The LCD screen displays the elongated size: X1, X2, X3, X4
or X5.
7. Select Mode Key
When you switch on the machine, the Direct Select Mode is active. You can
select the first ten stitches (illustrated on the keyboard) with a single touch
of the key.
Touch the "MODE" key to activate the 3 Digit Mode. You can select all
stitches by entering the 3 digits for the desired stitch.
Touch "MODE" key again to reactivate the Direct Select Mode.
r t y u i o
!1 !2 !3 !4 !5 !6 !7
18
!0
!8