Table of Contents
Advertisement
Hardware Preparation and Installation
Shipment Inspection
To inspect the shipment, perform the following steps:
1. Verify that you have received all items of your shipment.
2. Check for damage and report any damage or differences to customer service.
3. Remove the desiccant bag shipped together with the board and dispose of it
according to your country's legislation.
The product is thoroughly inspected before shipment. If any damage occurred during
transportation or any items are missing, contact customer service immediately.
2.3
Environmental, Power, and Thermal
Requirements
The next sections describe the environmental, power, and thermal requirements for the CPCI-
6115.
2.3.1
Environmental Requirements
The following table lists the currently available specifications for the environmental and
mechanical characteristics of the CPCI-6115. A complete functional description of the CPCI-
6115 baseboard appears in
PCI mezzanines can be found in the documentation for those modules.
You must make sure that the board, when operated in your particular system configuration,
meets the environmental requirements specified below.
Operating temperatures refer to the temperature of the air circulating around the board
and not to the component temperature.
Table 2-1 CPCI-6115 Specifications
Characteristics
PMC I/O Signal Impedance
Operating temperature
30
Chapter 4, Functional
Specifications
42 to 75 ohms (nominal impedance)
0°C to +55°C (32°F to 131°F) entry air with forced-air cooling
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
Environmental, Power, and Thermal Requirements
Description. Specifications for the optional
Advertisement
Table of Contents
