RJ-45 to DB-9 Adapter for COM1 to PC COM1
Table 5-10 COM1, COM2 Connector Pin Assignments (continued)
Pin
5
6
7
8
5.5.7
RJ-45 to DB-9 Adapter for COM1 to PC COM1
The following information is provided for those users wishing to attach a console to an CPCI-
6115 COM1 port for the purpose of terminal emulation.
A prewired, completely shielded RJ-45 to DB-9 female adapter assembly with 8 position RJ-45
socket on one end to DB-9 socket on the other end is available through Motorola. This can be
ordered through Motorola by requesting the following part number: MRJ45DB9ADP-01 (works
with either a Motorola or Intel CPU).
Connecting an CPCI-6115 to a PC terminal requires that the adapter described above be
attached to a standard RJ-45-to-RJ-45 shielded cable with straight through signaling.
The pinout information for this adapter is in the following table:
Table 5-11 Wire Interconnection List RJ-45 to DB-9
RF-45 Signal
DCD
RTS
GND
TxD
RxD
GND
CTS
DTR
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
Signal
RXD
GND
CTS
DTR
RJ-45 Pin
DB-9 Pin
1
4
2
8
3
5
4
2
5
3
6
OPEN
7
7
8
6
Transition Module Preparation and Installation
DB-9 Signal
DTR
CTS
GND
RxD
TxD
RTS
DSR
101