Table of Contents
Advertisement
Introduction
Table 1-1 CPCI-6115 Features (continued)
Feature
Watchdog Timers
Peripheral Support
PMC Slots
Front Panel
Debug Support
1.2
Standard Compliances
The CPCI-6115 is designed to be CE compliant and to meet the following standard
requirements.
Table 1-2 Board Standard Compliances
Standard
UL 60950-1
EN 60950-1
IEC 60950-1
CAN/CSA C22.2 No 60950-1
CISPR 22
CISPR 24
EN 55022
EN 55024
FCC Part 15
Industry Canada ICES-003
VCCI Japan
AS/NZS CISPR 22
EN 300 386
NEBS Standard GR-1089 CORE
26
Description
Four programmable timer/counters in the Marvel MV64360
One watchdog timer in the Marvell MV64360
One watchdog timer in the M48T37V
Three Gigabit Ethernet interfaces
IDE channel to support CompactFlash on transition module
Two async serial ports (two rear I/O or one front panel, one rear I/O).
PMC 2: 64-bit, 33/66 MHz PCI or 66/133 MHz PCI-X with front-panel I/O plus
rear I/O
PMC 1: 32-bit, 33 MHz PCI
Both slots support non-Monarch Processor PMC modules
One asynchronous debug port via RJ-45 connector
Recessed ABORT/RESET switch
CPU Activity and Board Fail LEDs
Switch and blue LED in handle to support hot-swap
Ethernet RJ-45 connector with Status LEDs
Serial port with RS-232 interface
Processor JTAG interface
RESET and ABORT signals
Boundary Scan Header
Description
Safety Requirements (legal)
EMC requirements (legal) on system level (predefined Motorola
system)
CPCI-6115 CompactPCI Single Board Computer Installation and Use (6806800A68D)
Standard Compliances
Advertisement
Table of Contents
