Polaris 2014 RZR XP 1000 Service Manual page 335

TRANSMISSION
CAUTION
Correct Drive Clutch Puller P/N 2872085
11. Loosely install the left rear shock bolt to hold left rear
trailing arm up in position.
12. Remove the stabilizer bar mounting bolt and nut
(Item 1) from both sides. Discard nuts and replace
with new upon assembly.
8.6
13. Remove the four bolts (Item 2) attaching the upper
and lower radius rods to the bearing carriers (left and
right side). Discard nuts and replace with new upon
assembly. Allow the radius rods swing downward.
14. Remove both lower shock bolts (left and right side)
while supporting the trailing arms from underneath.
Lift training arms up and swing trailing arms outward
to remove the drive shafts from the transmission.
15. Maneuver the drive shafts out of the vehicle frame.
Reinstall the lower shock bolts (Item 3) to hold the
trailing arms up during the rest of the removal
procedure.
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.