Polaris 2014 RZR XP 1000 Service Manual page 109

ENGINE
10. Use one of the oil pump retaining bolts or a pen
magnet to extract the dowel pins (Item 11) from the
oil pump. Doing so allows for oil pump removal
without having to remove the pump drive sprocket.
NOTE: If unable to extract the dowel pins from
the oil pump, the oil pump sprocket must be
removed. Access the sprocket bolt by removing
the case plug.
11. Lift the oil pump drive chain and remove the oil
pump.
3.48
12. Visually inspect the oil pump and drive sprocket
(Item 12) for wear or damage. Replace oil pump
drive chain and sprocket if worn or damaged. If any
part of the oil pump is damaged, the entire assembly
must be replaced. Replace the oil pump seal (Item
13) during crankcase assembly.
NOTE: Oil pump assembly is non-serviceable
13. Rotate the engine so the cylinder is facing up.
14. Remove the eleven M6 (Item 14) and two M8 (Item
15) upper crankcase bolts.
15. Rotate the engine so the cylinder is facing down.
9924874 R02 - 2014 RZR XP / XP 4 1000 Service Manual
© Copyright 2013 Polaris Industries Inc.