Adjusting The Throttle Cable Free Play - Yamaha MT-01 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk
9. Install:
• Air filter case
Refer to "GENERAL CHASSIS" on page 4-1.
• Fuel tank
Refer to "FUEL TANK" on page 6-1.
• Seat
Refer to "GENERAL CHASSIS" on page 4-1.
EAS20630
ADJUSTING THE THROTTLE CABLE FREE
PLAY
1. Check:
• Throttle cable free play "a"
Out of specification → Adjust.
Throttle cable free play
3.0–5.0 mm (0.12–0.20 in)
2. Remove:
• Pressure regulator cover "1"
3. Adjust:
• Throttle cable free play
NOTE:
When the throttle is opened, the accelerator ca-
ble "1" is pulled.
M MMM M MMM M M MMM M M MMM
Throttle body side
a. Loosen the locknut "2" on the decelerator ca-
ble.
b. Turn the adjusting nut "3" in direction "a" or "b"
to take up any slack on the decelerator cable.
Email: info@motomatrix.co.uk
a
1
M M MMM M M MMM M MMM
NOTE:
Apply locking agent (LOCTITE
of the adjusting nut "3".
c. Loosen the locknut "4" on the accelerator ca-
ble.
d. Turn the adjusting nut "5" in direction "a" or "b"
until the specified throttle cable free play is
obtained.
Direction "a"
Throttle cable free play is increased.
Direction "b"
Throttle cable free play is decreased.
e. Tighten the locknuts "2", "4".
4
1
2
3
NOTE:
If the specified throttle cable free play cannot be
obtained on the throttle body side of the cable,
use the adjusting nut on the handlebar side.
L LLL L LLL L L LLL L
M MMM M MMM M M MMM M
Handlebar side
a. Loosen the locknut "1".
b. Turn the adjusting nut "2" in direction "a" or "b"
until the specified throttle cable free play is
obtained.
Direction "a"
Throttle cable free play is increased.
Direction "b"
Throttle cable free play is decreased.
3-7
ENGINE
®
) to the threads
5
a
b
a
b
L LLL L L LLL L L LLL L
M MMM M M MMM M M MMM M
LLL
MMM