Removing The Rear Wheel; Disassembling The Rear Wheel; Checking The Rear Wheel; Checking The Rear Wheel Drive Hub - Yamaha MT-01 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk
EAS22040

REMOVING THE REAR WHEEL

1. Stand the vehicle on a level surface.
EWA13120
WARNING
Securely support the vehicle so that there is
no danger of it falling over.
NOTE:
Place the vehicle on a suitable stand so that the
rear wheel is elevated.
2. Remove:
• Rear brake caliper "1"
NOTE:
Do not depress the brake pedal when removing
the rear brake caliper.
3. Remove:
• Rear wheel axle nut "1"
• Rear wheel axle "2"
• Rear wheel
NOTE:
Push the rear wheel forward and remove the
drive chain from the rear wheel sprocket.
EAS22080

DISASSEMBLING THE REAR WHEEL

1. Remove:
• Oil seals
• Wheel bearings
Refer to "DISASSEMBLING THE FRONT
WHEEL" on page 4-8.
Email: info@motomatrix.co.uk
1
1
2
4-15
EAS22090

CHECKING THE REAR WHEEL

1. Check:
• Rear wheel axle
• Rear wheel
• Wheel bearings
• Oil seals
Refer to "CHECKING THE FRONT WHEEL"
on page 4-8.
2. Check:
• Tire
• Rear wheel
Damage/wear → Replace.
Refer to "CHECKING THE TIRES" on page
3-30 and "CHECKING THE WHEELS" on
page 3-32.
3. Measure:
• Radial wheel runout
• Lateral wheel runout
Refer to "CHECKING THE FRONT WHEEL"
on page 4-8.
Radial wheel runout limit
1.0 mm (0.04 in)
Lateral wheel runout limit
0.5 mm (0.02 in)
EAS22110

CHECKING THE REAR WHEEL DRIVE HUB

1. Check:
• Rear wheel drive hub
Cracks/damage → Replace.
• Rear wheel drive hub dampers
Damage/wear → Replace.
EAS22120
CHECKING AND REPLACING THE REAR
WHEEL SPROCKET
1. Check:
• Rear wheel sprocket
More than 1/4 tooth "a" wear → Replace the
rear wheel sprocket.
Bent teeth → Replace the rear wheel sprock-
et.
REAR WHEEL