Adjusting The Throttle Cable Free Play - Yamaha PW50W 2007 Service Manual

ADJUSTING THE THROTTLE CABLE FREE PLAY

a
ADJUSTING THE THROTTLE CABLE FREE
PLAY
NOTE:
Prior to adjusting the throttle cable free play,
the engine idling speed should be adjusted
properly.
1. Check:
9 Throttle cable free play a
Out of specification → Adjust.
Throttle cable free play
1.5-3.5 mm (0.06-0.14 in)
2. Adjust:
9 Throttle cable free play
MMMMMMMMMMMMMMMMMMMMMMM
a. Loosen the locknut 1 and adjusting nut
2(oil pump cable).
b. Loosen the locknut 3(carburetor side),
and then turn the adjusting nut 4 in direc-
tion a or b until the specified throttle
cable free play is obtained.
c. Tighten the locknut.
d. Adjust the autolube pump cable. Refer to
"ADJUSTING THE AUTOLUBE PUMP
CABLE".
e. Loosen the locknut 1(handle grip side),
and then turn the adjusting nut 2 in direc-
tion a or b until the specified throttle
cable free play is obtained.
a a
Direction
Direction b
f. Tighten the locknut.
w
After adjusting the throttle cable free play,
start the engine and turn the handlebars to
the right and to the left to ensure that this
does not cause the engine idling speed to
change.
LLLLLLLLLLLLLLLLLLLLLLL
3-6
CHK
ADJ
Throttle cable free play
is increased.
Throttle cable free play
is decreased.