Installing The Oil Pump - Yamaha MT-01 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk
• Oil pump shaft "6"
• Pins "7"
• Oil pump housing cover 2 "8"
Oil pump housing cover 2 screw
2 Nm (0.2 m·kg, 1.4 ft·lb)
• Pin "9"
• Oil pump inner rotor 1 "10"
• Oil pump outer rotor 1 "11"
• Ball "12"
• Collar "13"
• Spring "14"
• Pins "15"
• Oil pump housing cover 1 "16"
Oil pump housing cover 1 screw
2 Nm (0.2 m·kg, 1.4 ft·lb)
• Relief valve "17"
• Spring "18"
• Spring retainer "19"
Spring retainer bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
NOTE:
When installing the inner rotor, align the pin in
the oil pump shaft with the groove in the inner ro-
tor.
Email: info@motomatrix.co.uk
3. Check:
• Oil pump operation
Refer to "CHECKING THE OIL PUMP" on
page 5-84.
EAS25020

INSTALLING THE OIL PUMP

1. Install:
• Oil pump "1"
Oil pump bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
ECA13890
CAUTION:
After tightening the bolts, make sure the oil
pump turns smoothly.
5-85
OIL PUMP