Instrument Functions - Yamaha MT-01 Service Manual

Manuals by Motomatrix / www.motomatrix.co.uk
ET5YU1011

INSTRUMENT FUNCTIONS

Multifunction display
EW5YU1005
WARNING
Be sure to stop the vehicle before making
any setting changes to the multifunction dis-
play.
2
1
1. Clock
2. "RESET" button
3. Tachometer
4. "SELECT" button
5. Speedometer
6. Odometer/Tripmeter/Fuel reserve tripmeter
The multifunction display is equipped with the
following:
• a speedometer (which shows the riding speed)
• a tachometer (which shows engine speed)
• an odometer (which shows the total distance
traveled)
• two tripmeters (which show the distance trav-
eled since they were last set to zero)
• a fuel reserve tripmeter (which shows the dis-
tance traveled since the fuel level warning light
come on)
• a clock
• a self-diagnosis device
• a brightness control mode
NOTE:
• Be sure to turn the key to "ON" before using the
"SELECT" and "RESET" buttons except for
setting the brightness control.
• For the U.K. only: To switch the speedometer
and odometer/tripmeter/fuel reserve tripmeter
displays between kilometers and miles, press
the "SELECT" button for at least two seconds.
Email: info@motomatrix.co.uk
Tachometer
3
1. Tachometer
2. Tachometer red zone
4
The electric tachometer allows the rider to mon-
5
itor the engine speed and keep it within the ideal
power range.
6
When the key is turned to "ON", the tachometer
needle will sweep once across the r/min range
and then return to zero r/min in order to test the
electrical circuit.
EC5YU1009
CAUTION:
Do not operate the engine in the tachometer
red zone.
Red zone: 5500 r/min and above
The tachometer needle flashes when it reaches
and exceeds the red zone.
Clock mode
1. Clock
1-4
FEATURES
1
1
2