Yamaha MT-01 Service Manual page 76

Manuals by Motomatrix / www.motomatrix.co.uk
AB.Route the starter motor lead and sub-wire harness
1 under the battery box, making sure that they are
routed between the bolt holes in the battery box.
AC.Route the seat lock cable under the wire harness
to the left of the battery box. Be sure not to pinch
the seat lock cable when installing the battery box.
AD.Fasten the sub-wire harness 1 at the white tape
with the plastic locking tie. Face the end of the
plastic locking tie rearward, and then cut off the
excess end of the tie.
AE.To cylinder-#1 left spark plug
AF. Fasten the starter motor lead at the white tape with
the holder on the cylinder-#1 left ignition coil
bracket.
Email: info@motomatrix.co.uk
2-50
CABLE ROUTING