Yamaha MT-01 Service Manual page 768

Manuals by Motomatrix / www.motomatrix.co.uk
3. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 7-19.
OK ↓
This circuit is OK.
The tail/brake light fails to come on.
1. Check the front brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 7-89.
OK ↓
2. Check the rear brake light switch.
Refer to "CHECKING THE
SWITCHES" on page 7-89.
OK ↓
3. Check the entire signaling system
wiring.
Refer to "CIRCUIT DIAGRAM" on
page 7-19.
OK ↓
This circuit is OK.
The turn signal light, turn signal indicator light or both fail to blink.
1. Check the turn signal light bulbs
and sockets.
Refer to "CHECKING THE BULBS
AND BULB SOCKETS" on page
7-92.
OK ↓
2. Check the turn signal switch.
Refer to "CHECKING THE
SWITCHES" on page 7-89.
OK ↓
3. Check the hazard switch.
Refer to "CHECKING THE
SWITCHES" on page 7-89.
OK ↓
4. Check the turn signal/hazard relay.
Refer to "CHECKING THE TURN
SIGNAL/HAZARD RELAY" on page
7-97.
OK ↓
Email: info@motomatrix.co.uk
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the front brake light switch.
NG →
Replace the rear brake light switch.
NG →
Properly connect or repair the signaling
system wiring.
NG →
Replace the turn signal light bulb, socket or
both.
NG →
Replace the left handlebar switch.
NG →
Replace the left handlebar switch.
NG →
Replace the turn signal/hazard relay.
7-22
SIGNALING SYSTEM