Yamaha MT-01 Service Manual page 104

Manuals by Motomatrix / www.motomatrix.co.uk
d d c c
d d
3
e. Tighten both locknuts and then slide the rub-
ber cover to its original position.
f. Remove the pin.
g. Turn the main switch to "ON", check that the
EXUP valve pulley contacts the stoppers (ful-
ly-open and fully-closed positions), and then
check that the notch in the EXUP valve pulley
is aligned with the hole in the EXUP valve
cover.
L LLL L LLL L L LLL L L LLL
5. Install:
• EXUP valve pulley cover
EXUP valve pulley cover bolt
10 Nm (1.0 m·kg, 7.2 ft·lb)
Email: info@motomatrix.co.uk
3
c
L L LLL L L LLL L LLL
3-19
ENGINE