Yamaha MT-01 Service Manual page 514

Manuals by Motomatrix / www.motomatrix.co.uk
1. Fuel tank overflow hose
2. Fuel tank breather hose
3. Rollover valve hose 1
4. Rollover valve hose 2
5. Rollover valve 1
6. Rollover valve 2
7. Rollover valve hose 3
8. Rollover valve hose 4
9. Fuel tank breather/overflow hose
10. Oil tank
11. Bottom cover
A. Face the ends of the hose clamps in the directions
shown in the illustration.
B. Install the fuel tank overflow hose onto the front
pipe of the fuel tank with its yellow paint mark
facing outward.
C. Install the fuel tank breather hose onto the rear
pipe of the fuel tank with its white paint mark facing
rearward.
D. Install the rollover valve hoses with their paint
marks facing outward.
E. Fasten the fuel tank breather hose at the white
paint mark, fuel tank overflow hose at the yellow
paint mark, and fuel return pipe with the holder.
Fasten the hoses in the order listed with the fuel
tank breather hose fastened towards the front of
the vehicle.
F. Install the rollover valve hoses with their paint
marks facing downward.
G. Face the ends of the hose clamps forward.
H. Face the ends of the hose clamp rearward.
I. Install the fuel tank overflow hose and fuel tank
breather/overflow hose with their paint marks
facing rearward.
J. Route the fuel tank breather/overflow hose behind
the mounting boss on the oil tank.
K. The end of the fuel tank breather/overflow hose
should protrude past the edge of the bottom cover.
Email: info@motomatrix.co.uk
2-54
CABLE ROUTING