Making A Conference Call - AT&T SB67020 User Manual

Synapse SB67020/SB67025 Deskset User's Guide

Making a Conference Call

You can set up a conference call with yourself and two telephone numbers (either
internal, external, or with both). The pictures below show Call Appearance mode, but the
procedure is the same in Line Appearance mode.
To make a conference call:
1. Press
the Conference Setup screen appears.
2. Establish a second call. You can dial the second call normally, as shown below, or
you can select a held call and take it off hold, or you can start the second call from
a list. See

When the second call has been established, the
0:03
9-1-732-555-7318
Join
3. To join the calls, press
Your extension is now in conference with the other two phone numbers.
0:15
9-1-732-555-7318
Drop
If you hang up while on the conference, the conference ends. If you make or answer
another call, the conference continues without you. You can rejoin by pressing a
corresponding Call Appearance or Line Appearance key.
Call Management
from an Active Call screen. The call is automatically put on hold and
Conf
"Accessing Items in Lists" on page
2
2
.
Join
2
EndConf
46
Press
Conf
50.
Join
Back to Contents
soft key appears.