Listening To Voicemail From The Call Log; Storing Call Log Entries - AT&T SB67020 User Manual

Synapse SB67020/SB67025 Deskset User's Guide

Listening to Voicemail From the Call Log

If the caller left a message, you can play the message from the Call Log.
To play a message from the Call Log:
1. On the Call Log screen, press
2. Press
Graham Bell
Jul 19 1:18p
Pause
If necessary, use the dial pad to enter your password and press SELECT.
3. Press Delete while the message is playing to delete the voice message. There is a
slight delay until the message indicators change.
4. When the message playback completes, the Call Log appears.
5. Press CANCEL to exit the Call Log.

Storing Call Log Entries

To store a Call Log entry into your Personal list:
1. From the desired Call Log entry, press
2. Press
screen appears.
)LUVW 1DP H $QJHOD 0D
/DVW 1DP H
3KRQH 
Save
The caller information fills in the First Name and Number fields.
3. Fill in the Last Name field, if desired. To create the Last Name or to edit any field,

use
)LUVW 1DP H $QJHOD
/DVW 1DP H 0DUWLQ
3KRQH 
Save
Call Log

. The message playback screen appears.
PlayMsg
!
05:10
Delete
only appears if the call has an associated voicemail.
PlayMsg
to store the entry in your Personal list. The store personal entry
Store
Pause Backspc

or and the dial pad. See
Pause Backspc
When entering a phone number, you must add a 9 or whatever digit, if any,
that must be dialed first to indicate this is an external call. Enter 1 if it is a
long-distance number.
The system does not check for duplicate entries.
80

or until the desired entry is on the screen.
 
or to display the
"Dial-Pad Entry" on page
Back to Contents
soft key.
Store
21.