Calling A Restricted Number; Calling Restricted Numbers On Your Extension; Calling Restricted Numbers Using Another Extension - AT&T SB67020 User Manual

Synapse SB67020/SB67025 Deskset User's Guide

Calling a Restricted Number

Call Restriction Settings apply to Call Appearance mode only.
Your system administrator can configure Call Restriction settings that may prohibit you
from making calls to certain types of numbers — international long-distance numbers, for
example.
Call Restriction settings are specific to each extension in the system. For example, your
extension may have no call restrictions, but other users may be restricted to making only
local calls from their Desksets.
You can always answer and transfer incoming calls from restricted numbers.
To call a restricted number, you must create a User Password on the User Settings menu
or the WebUI. To create a User Password, see
page 100.

Calling Restricted Numbers on Your Extension

You cannot complete a call to a number that the system administrator has restricted for
your Deskset. If you dial a restricted number and go off hook, a password screen appears.
After you enter your extension number and password, the Restricted Call screen
appears, as shown in Figure 14.
You can press CANCEL or hang up to return to the Idle screen immediately.

Calling Restricted Numbers Using Another Extension

If you need to use someone else's Deskset to call a number that is restricted on that
Deskset, you can enter your Extension number and User Password to complete the call.
To make a restricted call:
1. On a Synapse Deskset other than your own, dial the number as described in
"Predialing" on page 27
If the number is restricted on the Deskset, the Restricted Call screen appears as
shown in Figure 14.
2. Enter your own extension number and user password.
If the dialed number is not restricted for your extension number, the Deskset dials
the number.
Outgoing Calls
"Setting and Changing Your Password" on
Press SELECT
Figure 14. Restricted Call
or "Live Dialing" on page
31
Back to Contents
28.