Pause Insertion; Pc Console/Pc Phone - Panasonic KX-TDA600 Feature Manual

None
Feature Manual References
2.1 Capacity of System Resources

1.13.4 Pause Insertion

Description
Pressing a PAUSE button inserts a preprogrammed Pause time between digits of a user-dialed number
before the number is dialed out, allowing certain numbers separated with a pause to be used to access
certain features (e.g., access codes, seizing idles lines, etc.).
When a pause is needed, pauses must be inserted manually (pressing the PAUSE button) in all cases,
except for the following access codes where a pause is automatically inserted between the user-dialed
access code and the subsequent digits:
a)
Host PBX Access code (→ 1.8.5 Host PBX Access Code (Access Code to the Telephone
Company from a Host PBX))
b)
Special Carrier Access code (→ 1.16.2 Special Carrier Access Code)
c)
Second Dial Tone Waiting code
Conditions
• The length of a pause is programmable for each CO line.
• Numbers stored in Memory Dialing can contain pauses.
• When a Second Dial Tone Waiting code is dialed after seizing a CO line, a preprogrammed number of
pauses are inserted after the code.
• ARS
A pause is not automatically inserted between the user-dialed access code and the subsequent digits
when the ARS mode is enabled. (1.1.3 ARS (Automatic Route Selection))
Programming References
PC Programming Manual
2.8.11 [1-1] Slot—Port Property - LCO Port—Pause Time
2.8.17 [1-1] Slot—Port Property - T1 Port (KX-TDA100/KX-TDA200/KX-TDA600 only)—Pause Time
2.9.4 [2-3] Timers & Counters—Miscellaneous—During Conversation—Pause Signal Time
2.13.4 [6-4] Second Dial Tone
PT Programming Manual
[416] LCOT Pause Time

1.13.5 PC Console/PC Phone

Description
CTI First Party Call Control can be conducted by connecting a PC with a KX-T7633 or KX-T7636 DPT
(equipped with USB module KX-T7601) through USB ports. By using the KX-TDA0350 PC Phone or KX-
1.13 P
Feature Manual 197