Ip-Pt (Ip Proprietary Telephone) - Panasonic KX-TDA600 Feature Manual

1.9 I
Programming References
PC Programming Manual
2.9.13 [2-7-3] Class of Service—Internal Call Block—COS Number of the Extension Which Receive the Call
from Other Extension 1–64
2.10.12 [3-5-1] Incoming Call Distribution Group—Group Settings—Main—COS
2.11.1 [4-1-1] Wired Extension—Extension Settings—Main—COS
2.11.10 [4-2-1] Portable Station—Extension Settings—Main—COS
2.12.1 [5-1] Doorphone—COS
2.12.6 [5-4] External Relay—COS Number
PT Programming Manual
None
Feature Manual References
1.3.19 COS (Class of Service)

1.9.15 IP-PT (IP Proprietary Telephone)

Description
This PBX supports the connection of IP proprietary telephones (IP-PTs), which function almost identically
to normal PTs. However, they connect to the PBX over a Local Area Network (LAN), and send and receive
calls using Internet Protocol (IP).
IP-PTs have two Ethernet ports for connection, primary and secondary. They are connected to the PBX
through a network hub or other splitting device, and can have a PC connected to the secondary Ethernet
port.
[Connection Example]
PBX
IP-EXT
Main Office
Conditions
• Hardware Requirement: An IP-EXT card
• IP-PT registration is required through system programming before an IP-PT can be used with the PBX.
An IP-PT cannot be used unless an extension number is assigned. For details on how to register IP-
PTs, see the Installation Manual.
• The following features cannot be used with an IP-PT:
164 Feature Manual
Private IP
Network
IP-PT
(KX-NT136)
Primary
Secondary
Ethernet Port
Ethernet Port
IP-PT
PC
Branch Office
IP-PT